Suzuki DT6 - 1995

by Bob Fraser
(Nova Scotia)

Suzuki DT6

Suzuki DT6

I only seem to get half the rpms out of the engine my max speed with a light 12' fiberglass boat is 8km/hr 2.5hps with much more weight are keeping up or passing me. I have checked compression 105psi in both cylinders, plugs are new and gapped 0.032", seems to be good spark coming from both wires, new fuel and mixed a little heavy in oil (75:1), all new fuel lines (tank to engine and internal lines (I went back and replaced the blue line in the pic with proper fuel line. I've cleaned the carb a couple times but still no change in thrust. Seems to have a good stream of water coming out of the engine, prop is clear of debris, and in decent shape (Edges are a little rough but not bent or too bad)

the only thing I know is damaged is the screw (Adjuster) at the bottom of the float on the carb. Its missing the spring and the screw is bent. I thought it was a drain screw but maybe its more? I'm at a loss at this point and could use some guidance.

Thanks
Bob

Comments for Suzuki DT6 - 1995

Average Rating starstarstarstarstar

Click here to add your own comments

May 24, 2023
Rating
starstarstarstarstar
no rpms
by: Anonymous

Hi,
buy this 5 dollar electronic rpm meter so you know exactly what we are talking about. If it is 1/2 rpms than check the throttle linkage if it is opening the carb 100% and connect fuel line straight to the carb for testing. Another thing is a rpm limiter malefaction and cuts off ignition at 50%

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Suzuki Outboard Forum.